ຂ່າວອຸດສາຫະ ກຳ

ຂໍ້ຄວນລະວັງໃນເວລາທີ່ ນຳ ໃຊ້ທໍ່ສົ່ງທໍ່.

2021-06-09

1. ໃນລະຫວ່າງການປະຕິບັດງານຂອງປັpipelineມທໍ່, ອຸນຫະພູມຮັບຜິດຊອບບໍ່ຄວນເກີນອຸນຫະພູມອາກາດລ້ອມຮອບ35â„ ƒ, ແລະອຸນຫະພູມສູງບໍ່ຄວນເກີນ80â„ ƒ.

2. Add bearing lubricating oil to the bearing body of theປັpipelineມທໍ່, and observe that the oil level should be at the center line of the oil mark, and the lubricating oil should be replaced or supplemented in time.

3. Unscrew the water diversion screw plug of the pump body of theປັpipelineມທໍ່, and fill the water diversion.

4. Close the gate valve, outlet pressure gauge and inlet vacuum gauge of the outlet pipe of theປັpipelineມທໍ່.

5. Jog theປັpipelineມທໍ່ motor to see if the rotation direction of the motor is correct.

6. Start theປັpipelineມທໍ່ motor. When theປັpipelineມທໍ່ is running normally, open the outlet pressure gauge and the inlet vacuum pump. After seeing the proper pressure, open the gate valve gradually, and check the motor load at the same time.

pipeline pump